机械工程专业离心铸造英语翻译
机械工程专业出国留学申请除了要达到所申请学校的语言要求，还要有较好的专业知识，并且能够有英文熟练的表达这些专业知识，下面金东方留学小编整理了机械工程专业标尺尺寸方面的常用的，面试的时候能用的到的英语表达方式，希望对计划出国读机械工程专业的童鞋们有所帮助。
离心铸造
Centrifugal casting (Fig.3.3) as a category includes centrifugal casting, semi-centrifugal casting and centrifuging. In centrifugal casting, a permanent mold is rotated about its axis at high speeds (300 to 3,000rpm) as the molten metal is poured.
离心铸造(图3.3)作为一个种类包括了离心铸造、半离心铸造和离心法铸造。离心铸造中，永久性的型模在熔化金属浇铸时以较高速度(300到3,000rpm)绕其轴线旋转。
The molten metal is centrifugally thrown towards the inside mold wall, where it solidifies after cooling. The casting is usually a fine grain casting with a very fine-grained outer diameter, which is resistant to atmospheric corrosion, a typical situation with pipes. The inside diameter has more impurities and inclusions, which can be machined away.
受离心力作用熔化金属被抛向型模的内壁，在那里冷却后固化。这种铸件通常为外径处晶粒非常细小的细晶粒铸件，能耐大气腐蚀，典型的情况是管子。内径处则有较多的杂质和内含物，但可用机加工去除。
Only cylindrical shapes can be produced with this process. Size limits are up to 3m(10feet) diameter and 15m(50 feet) length. Wall thickness can be 2.5mm to 125mm(0.1~5.0in.). The tolerances that can be held on the OD can be as good as 2.5mm (0.1in.) and on the ID can be 3.8mm(0.15in.). The surface finish ranges from 2.5mm to 12.5mm(0.1~0.5in.) rms(root-mean-square).
只有圆柱形才能用此工艺生产。尺寸限制为直径大到3m(10feet)、长度大到15m(50feet)。壁厚为2.5mm到125mm(0.1~5.0in.)。外径公差保持在2.5mm(0.1in.)以内，内径公差保持在3.8mm(0.15in.)以内。表面粗糙度的有效值(均方根)范围为2.5mm到12.5mm(0.1~0.5in.)。
Typical materials that can be cast with this process are iron, steel, stainless steels, and alloys of aluminum, copper and nickel. Two materials can be cast by introducing a second material during the process. Typical parts made by this process are pipes, boilers, pressure vessels, flywheels, cylinder liners and other parts that are axis-symmetric.
可用此工艺铸造的典型材料有：铁、钢、不锈钢以及铝、铜和镍的合金。通过在生产过程中加入第二种材料能进行两种材料铸造。采用这种工艺制造的典型零件有：管子、锅炉、压力容器、飞轮、汽缸衬垫和其它轴对称零件。
